Metalfire AVENUE MF 1050-40 GHE, Инструкция по установке и эксплуатации

Страница: 18 / 103

AVENUE_GHE_EN_07
18
If it is not possible to supply the room air at the bottom via the sides of the surround, an opening must be made at
the bottom in the front for the air supply from the room.
One option is a finish at the bottom of the frame that has a slit through which the air can be drawn by convection
flow.
See the outline drawing below:
5.2.3.2 Underside of the fireplace at floor level
All Avenue MF 800-75 GHE, Avenue MF 900-60 GHE, Avenue MF 1050-60 GHE, Avenue MF 1050-75 GHE and
Avenue MF 1300-60 GHE models can be built in so that the underside of the fireplace is installed at floor level.
The fireplace surround and finish must be made from incombustible and heat-resistant material.
There must be a minimum distance of 30 mm between the rear wall and the fireplace.
There must be a minimum distance of 100 mm between the fireplace and the sidewalls.
Metalfire offers a set of 15 mm insulation boards made of calcium silicate and cement for every type of fireplace,
which can be installed directly on the fireplace.
Brickwork and plastering must not be in direct contact with the fireplace or the optional mantelpiece; there must
always be a gap of at least 3 mm between them.
A minimum distance of 20 mm must be kept free at all times between the underside of the fireplace and the
bottom of the floor recess.
Always open all the bottom convection openings.
There must be a recess in the floor for installing the fireplace.
See the technical file for the appliance in question to determine the dimensions of the recess.
Room air supply at the bottom