Metal Sistem SUPER 1-2-3 SHELVING, Инструкция по правильной сборке

Страница: 3 / 12

A
A
A
A
X
X
< X
< X
1.
3.
2.
3
SUPER 1-2-3 - Assembly instructions
cod: ISTM027
classification : CONTROLLED
Note the difference between the
top and bottom connection of
the diagonal.
The top is longer so to act as an
assembly guide to set the correct
assembly angle.
The dimension of the horizontal
spacer bar is equal to the nominal
frame dimension. Check the
diagonal spacer bar by overlaying
it against the horizontal.
If the connection lugs align,
the diagonal is correct.
Both diagonal and horizontal
spacer bars contain a central
ribbon (A), present between
the connection lugs. This locks
behind the upright connection
lug to create a safety clip to
prevent these components
from decoupling.
Mark out the frame bracing
connection points on the pair of
uprights of a frame.
During this operation make
sure to mark the correct side
of the upright for each frame
component, as detailed in the
Technical Manual.
Assemble a complete frame
following the procedure detailed
below. Use the first frame as a
guide for all other frame assembly.