Metal Samples MS2901E, Руководство оператора

Страница: 28 / 53

24
Command 190 - Write Probe Type
This command allows to set the Probe Type into the slave device.
(1 ‐ Wire, 2 – Tube, 3 – Cylinder, 4 ‐ Small Flush, 5 ‐ Large Flush ,6 – Spiral, 7 – Strip, 8 ‐ MC ‐ E)

Level 1 / Level 2 password entry is required.
Request Bytes
Byte Format Description
0 Unsigned Char Probe Type
Response Bytes
Byte Format Description
0 Unsigned Char Probe Type
Command ‐ Specific Response Code
Code Class Description
0 Success No Command ‐ Specific Errors
7 Error Write Protection
11 Error Entered Value not Valid
Command 191 - Read Probe Type
This command allows the master to request to read the Probe Type from the slave
(1 ‐ Wire, 2 – Tube, 3 – Cylinder, 4 ‐ Small Flush, 5 ‐ Large Flush ,6 – Spiral, 7 – Strip, 8 ‐ MC ‐ E)
Request Bytes
Byte Format Description
‐ ‐
Response Bytes
Byte Format Description
0 Unsigned Char ‐ 8 Probe Type
Command ‐ Specific Response Code
Code Class Description
0 Success No Command ‐ Specific Errors
16 Error Access Restricted