Metal Samples MS2500L, Руководство оператора

Страница: 13 / 48

9
B. Probes and Electrodes
The PAIR
TM
probes used in conjunction with Metal Samples corrosion rate instruments are an essential
component of a corrosion rate measuring system. For this reason, the composition of the electrodes
installed on the probe must be matched as nearly as possible to the composition of the components of
the processing system in which the probe and electrodes are installed. In addition, the placement of the
probe is extremely important in obtaining accurate corrosion rate readings. Basically, a probe is simply a
means of mounting the three electrodes which are necessary to make the corrosion rate measurement
and provides a means of electrically connecting the electrodes, the composition of which is determined
by the customer.
The probes are generally classified into two types: laboratory probes and industrial probes. All probes
are supplied with MIL environmental electrical connectors unless otherwise specified. For further
information on probes and electrodes contact:
Metal Samples
P.O. Box 8
Munford, AL 36268
Phone: (256) 358-4202
Fax: (256) 358-4515
E-mail: msc@alspi.com
Internet: www.metalsamples.com