15
9090 Assembly InstructIons
9090 hose Assembly InstructIons
1. Wrench tighten the 3/8” female flare swivel to the brass adapter.
2. The hose to burner (brass adapter) connection must be tightened and leak tested.
* Models may vary from picture.
jet pIpes
3/8 FemAle
FlAre swIVel
orIFIce cAp (2)
(located under jet pipes)
(do not remoVe thIs FIttIng)
the orifice is the drilled hole in the brass cap
which should be pointing up directly into the jet pipe.
AdjustAble regulAtor
type 1
connectIon
brAss
AdApter
20 lb.
lp gAs
cylInder
1. Remove unit from box and remove all packing materials between cooker frame and aluminum pot.
All packaging materials must be removed before operation of the appliance.
2. Make sure the spigot drain valve is in the OFF/CLOSED position as pictured below.
spIgot
VAlVe In
oFF/closed
posItIon
