33
4.3.
Daily service
Always check the technical condition of the arm before work:
-
Inspect all screw connections and retighten all loose bolts;
-
Worn out bolts and screws may break under loads;
-
Check the tightness of the hydraulic system;
-
Immediately replace all damaged lines;
-
Start the arm to move in the full range of motion to ensure that all its functions are working.
-
Immediately stop work if structural cracks are found;
-
Do not clean with pressure washers.
First, wash the machine with warm water.
Use an
environmentally friendly detergent, if necessary. Lubricate the loader after washing.
Warning:
If cut, wash the wound and sterilise with hydrogen peroxide.
Contamination of the wound may result in bacterial infections
that are hazardous to health and life!
Содержание T466
Страница 20: ...20 Fig 5 Top position of the loader arm...
Страница 21: ...21 Fig 6 Bottom position of the loader arm...
