Metal-Fach SE MAX II, Техническое и эксплуатационное руководство

Страница: 21 / 52

METAL-FACH Heating Technology
19
The boiler should be placed on a heat insulating non-combustible pad which should be 2 cm larger than the
base of the boiler on each side. If the boiler is located in a basement, it is recommended that it is placed on a
foundation of at least 5 cm. The strength of the foundation as well as the fire protection conditions are key
guidelines when placing the boiler in the correct location, these include:
●
20 cm safe distance from flammable materials,
●
40 cm for flammable materials of flammability grade C3,
●
40 cm if the degree of flammability is not known.
Degree of combustibility of building masses and
products
Building materials and products
A - Non-flammable
Sandstone, concrete, bricks, fireproofing plaster,
mortar, ceramic tiles, granite
B - Hard to burn
Wood and cement boards, fibreglass, mineral
insulation
C1 - Hard to burn Beech wood, oak wood, plywood
C2 - Medium burning
Pine, larch and spruce cork, sawn wood planks, rubber
floor coverings
C3 - Easy to burn
Asphalt plywood, celluloid, polyurethane, polystyrene,
polyethylene, plastic, PVC
Connection of the boiler to the heating system
(Installer)
The connection of the boiler to the central heating system should be made by a firm authorised by the
manufacturer and the fact of a correct connection should be confirmed on a guarantee card enclosed with this
manual. The boiler should be connected according to the manufacturer's recommendations, in accordance with
this manual.
NOTE!
It is recommended that the first start up of the boiler is carried out in accordance with the
instructions in the Technical Operation Manual by a person holding a valid licence
(information on persons authorised to start up the boiler is available from the Producer -
telephone: +48 85 711 94 56).