Metal-Fach SD DUO BIO Series, Эксплуатационная и техническая документация

Страница: 31 / 68

29
15. B
(USER)
ATTENTION!
Clean the boiler only when it is disconnected
from the power supply.
! !
In order to save fuel, the burner chamber as well as the convection
channels must be kept clean. The walls and the grates in the burner
chamber should be cleaned through the charger and burner doors. The
boiler exchanger should also be cleaned regularly. the convection
channels and the flue should be cleaned through cleaning hatch on the
boiler flue or at the bottom in the side wall. It should be carried out with
expendable metal brushes. The boiler should be cleaned during the idle
period, preferrably every 100 hours.
A thorough cleaning of the boiler should be done monthly. If the fuel
is of low quality, cleaning should be done more often.
16. I
(USER)
Before scrapping the boiler, all the electronic elements should be
removed. They should be disposed of according to the 2002/96/WE
Electric and Electronic Equipment. In order to dispose of the electronic
elements you should contact the manufacturer. The steel elements the
boiler is made from should be scrapped in the dedicated locations (scrap
yards).
ATTENTION!
The boiler and its elements should not be
disposed of toghether with other waste.
! !
17. S
(USER/INSTALLER)
Sensors
Spare parts
Temperature sensors for FL300, FL310, FL600
Boiler sensor
Feeder sensor
Return sensor
Central Heating Sensor
Hot Tap Water Sensor
Outside sensor
Fumes sensor
Photo sensor
Temperature sensor for PLUM 800
Boiler sensor
Feeder sensor
Return sensor
Central Heating sensor
Article
T able 17.1 Spare parts
Ignition
Controllers
ZTK Thermal protection
STB Thermal protection
Ignition 700W
FL600 RTC Regulator
FL310 RTC Regulator
FL310 RTC FOTO regulator (2xfeeder)
Display for FL600 RTC, FL310 RTC, FL310 RTC
FOTO
Display for FL300 3P Alfa
Display for PLUM 800 R1
Display for PLUM 800 R2