Metal-Fach N280, Инструкция по эксплуатации/Каталог запасных частей

Страница: 8 / 32

8
2.2. NOISE AND VIBRATION
The operator is inside the tractor cab when the machine is working.
The equivalent sound pressure emission level A (LpA) is 75.0 ± 1 dB.
The peak sound pressure value C (LCpeak) is 82.0 ± 1 dB.
Machine sound power – N/A.
(Measurements acc. to PN-EN ISO 4254-1:2006 Annex B section 2.6)
No vibration hazards occur when working with this machine.
The operator's workstation is located in the tractor cab, with shock absorption and an ergonomically
profiled seat. The value of the vibration exposure of the operator does not exceed 0.5 m/s
2
.
3. INFORMATION AND WARNING SIGNS
Extremely hazardous areas are indicated with the yellow warning signs and warning labels placed on the
machine. During operation of this machine, exercise extreme caution when remaining in direct proximity of
these areas.
Check the serial number indicated in the Operating Instructions and the warranty card against the serial
number stamped on the nameplate and the chassis frame. The nameplate and the stamped serial number are
located on the chassis end sill, i.e. on the right side of the machine.
The warning stickers must always be legible. If the stickers become illegible, an assembly on
which they are located is replaced or the machine is repainted, the stickers must be purchased
at the retail outlets or ordered at your local dealer as spare parts and suitable replaced.
Warning! Read the Operating Instructions.
(1x)
Turn off the engine and remove the ignition key
before servicing or repairs.
(1x)
1 2