Metal-Fach KRUK U-710 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 22

Metal-Fach KRUK U-710 Скачать руководство пользователя страница 15

15

The machine should be adjusted during the first pass. If the machine is properly levelled the

frame is parallel to the field's surface.

WARNING - Avoid jerky movements while using the machine.

- Make turns gently with the machine raised in the transport position.
- Do not reverse or turn the tractor around with the machine in the working

position as it may cause damage to the machine.

8.5

LUBRICATION AND STORAGE

The durability and efficiency of the machine depends to a large degree on systematic

lubrication. Use mineral oils for lubricating the machine. Before adding grease clear the lubrication
points. The lubrication should be performed according to fig. 5.

Use the ŁT-4S-3 once per season.
The hubs of the harrow disks must be lubricated twice per year:

+ before the spring season,
+ before the autumn season.

Fig. 6.

1- joint bushing, 2- hitch spindle bolts, 3- undercarriage spindle bolts, 4,6- hydraulic

cylinders (cylinder eye), 5- bearing set of the disc blades, 7- undercarriage

joint, 8- packer bearing set, 9- arm pins.

Before a long period of storage the machine should be cleaned and all malfunctions should be
repaired. Protect the machine against weather conditions. The machine should be stored in the
unfolded position on a level, hard surface.

9.

RESIDUAL RISKS

9.1

DESCRIPTION OF RESIDUAL RISKS

The residual risk results mostly from improper behaviour of the operator caused by lack of

knowledge or attention. The highest residual risk occurs in the following situations:

•

the machine is operated by minors or persons who are unfamiliar with the operating
instructions,

•

the machine is operated by persons under the influence of alcohol or other intoxicants,

•

the machine is used for purposes other than specified in the operating instructions,

«
...
13
14
15
16
17
...
»

Содержание KRUK U-710























Отзывы:

Нет отзывов