Picture 1 Picture 2 Picture3
2. INTERVAL10/20, READY, WORK, REST, TARGET, TIME, DISTANCE,
CALORIES, TIME, DISTANCE, CALORIES, WATTS, SPEED, PACE,
HEART RATE will flash in sequence for 1 second in SCAN mode
(similar to Figure 2).
3. If no button is pressed, PACE signal, heartbeat signal will
automatically sleep after 60 seconds.
4. Fast exercise mode:
A. If there is a PACE signal input during standby, immediately QUICK
START, and the buzzer will sound for 1 second at the same time.
B, TOTAL TIME, TIME, DISTANCE, CALORIES, WATTS, SPEED, PACE
start counting according to the calculated value (Figure 3).
C.
The heartbeat symbol flashes when there is a heartbeat input, and
the symbol flashes on and displays the current heartbeat value
(Figure 4); when there is no heartbeat input, P keeps on
D.
After 30 seconds without any signal input, the buzzer will sound for
1 second to enter the wake-up mode.
E.
Press the START button once, the buzzer will sound for 0.5 seconds
every 30 seconds when entering the pause mode. When entering the
pause mode, all the displays will remain on the screen for 3 seconds
and then flash once every four seconds (3 on/1 off), continuing After
a pause of 5 minutes, the buzzer will sound for 2 seconds to enter the
wake-up mode, press START to continue running.
