continuing After a pause of 5 minutes, the buzzer will sound for 2
seconds to enter the wake-up mode, press START to continue
running.
H. Press the STOP button or the buzzer will sound for 1 second after
the end, TIME displays the total time, DISTANCE displays the total
distance, and CALORIES displays the total calories for 30 seconds.
WATT, SPEED, and PACE exchange display average and maximum
values every five seconds.
I. When there is a heartbeat input, the 85%, 65% heartbeat value
and the maximum value are exchanged and displayed every five
seconds, if there is no heartbeat input, it will not be displayed.
J. Press any PROGRAM key to execute the action.
Pic 1 Pic 2 Pic 3 Pic 4
5.2 Select INTERVAL 10-20:
A.
Press INTERVAL Key to select INTERVAL10/20, press Enter Key,
enter this mode, INTERVAL10/20 will light up, and the buzzer will
sound for 1 second at the same time.
B.
CYCLE TIME counts down three seconds and then START. During
the countdown, the buzzer sounds once per second and READY
flashes once per second (0.75 on/0.25 off), and the count displays
00/08 (Figure 5).
C.
CYCLE TIME starts to count down 10 seconds and WORK flashes
once per second (0.75 on/0.25 off) buzzer also sounds synchronously,
REMAINING lights up and counts down from four minutes, TOTAL
TIME, DISTANCE, CALORIES, WATTS, SPEED, PACE Start counting
according to the calculated value, and the counting displays 01/08.
