Metagenics Fitness MF-8000, Руководство пользователя

Страница: 8 / 10

“pause” button to pause the motion or end the motion. Stop button to stop motion
III. Function data display instructions:
Item Program Display range Setting
range Zero Discription
1. TIME
0:00 ~99:59
Min Sec Min Sec
0:00 ~99:00
±1 minute
cycle
Yes
1.The number of cycles is counted when there
is no setting.
2.When the countdown to 0 is set, the system
STOP, the time window flashes.
2. SPEED
0.0~99.9
KMH(MLH)
No Yes
In motion:
1.The sensor signal is input for 3 seconds and
its value is displayed.
2.After no sensor signal input, its value is reset
to zero.
3. RPM 0~15~999 No Yes
In motion:
1.Display the value after inputting the sensor
signal for 3 seconds.
2.After no sensor signal input, the value
returns to zero after 4 seconds.
4. DISTANCE
0.00~99.99
KM(ML)
0.00~99.50
±0.1 cycle
Yes
1.The number of cycles is counted when there
is no setting.
2. When there is a setting to count down to 0,
the system STOP, the distance window
flashes,
5. CALORIES 0~999 CAL
0~990
±10 cycle
Yes
1.The number of cycles is counted when there
is no setting.
2.When there is a setting to count down to 0,
the system STOP, the distance window
flashes,
6. PULSE P ， 30~240 0 → 30~240 Yes
The heartbeat window displays the heartbeat
value when the heartbeat signal is detected,
and P when it is not detected.
7.
Small point
in the lower
right corner
of the
heartbeat
window
ON/OFF flicker No No
1.The heartbeat pulse “Hi Low” is displayed in
flashing speed.
2.When there is no input signal, the small dot
must disappear.
8. LEVEL
1~26 LEVEL
(±1LEVEL)
No
Adjust the resistance during exercise