9
9
PART 5 IMPORTANT NOTES
The following point, please pay more attention:
1.
While working, spray the coolant continuously and clean the iron scrap.
1.1
Make the iron scrap come out easily.
1.2
Prolong the tool life
1.3
Make sure avoid the coolant goes into electric motor
1.4
Make sure avoid the iron scrap goes into electric motor
2.
If the tool blunt, working resistance increased, result in shaft, motor and gears parts damaged. Please
edge it or replace with a new one in time. If edge the tool, one tool can be used times
3.
Machine stops itself, cannot turn on it forced. If the motor overheating, need self-cooling. Back the tool, re-
start working.
4.
Make sure the operator always beside the machine while working.
5.
Strictly prohibited the machine overload working.
6.
Working with high hardness pipe or heavy wall pipe, make sure adopts low grade/high speed working
speed. (1-E or 1-F).
7.
Pay attention to maintenance of machine, filling grease regularly.
Clean and dry the machine after each job finished.
8.
Operator must read this manual completely before operation, the damage caused by wrong
operation out of warranty scope.
