Metabo 02397000, Оригинальное руководство пользователя

Страница: 20 / 24

en ENGLISH
20
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
11. Technical Specifications
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U = Voltage of battery pack
n
0
= No-lo sad peed
S = impact frequency
H = machine tool holder
m = weight (with the smallest battery pack)
M
1
= min. tightening torque
M
2
= medium tightening torque
M
3
= max. tightening torque
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be
higher or lower depending on operating conditions,
the condition of the power tool or the accessories
used. Please allow for breaks and periods when
the load is lower for assessment purposes.
Arrange protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three
directions) determined in accordance with EN
62841:
a
h
= Vibration emission value (screwdriving
with impact)
K
h
= uncertainty (vibration)
Typical A-weighted sound levels:
L
pA
= sound-pressure level
L
WA
= acoustic power level
K
pA
, K
WA
= Uncertainty (noise level)
Wear ear protectors!