Metabo 02397000, Оригинальное руководство пользователя

Страница: 17 / 24

ENGLISH en
17
Original instructions
1. Declaration of Conformity
We hereby declare under our sole responsibility that
these cordless impact drivers, identified by type and
serial number *1), meet all relevant requirements of
directives *2) and standards *3). Technical
documents for *4) - see page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
cordless impact wrench, identified by type and
serial number *1) on page 3, fulfill all relevant
provisions of following UK Regulations S.I.
2016/1091, S.I. 2008/1597, S.I. 2012/3032 and
Designated Standards EN 62841-1:2015, EN
62841-2-2:2014, EN IEC 63000:2018.
2. Specified Conditions of Use
The impact driver is suitable for driving in and
removing screws.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Information
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep all safety instructions and information
for future reference.
Always include these documents when passing on
your power tool.
4. Special safety instructions
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Remove the battery pack from the machine before
making any adjustments, changing tools, maintaining
or cleaning.
Make sure that the tool is switched off before fitting
the battery pack.
Ensure that the spot where you wish to work is free of
power cables, gas lines or water pipes (e.g. using
a metal detector).
Secure the workpiece to prevent slipping or rotation
(e.g. by securing with screw clamps).
Protect battery packs from water and
moisture!
Do not expose battery packs to fire!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short circuit battery pack contacts!
A slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately with
plenty of water. If battery fluid leaks out and
comes into contact with your eyes, wash them with
clean water and seek medical attention
immediately!
If the machine is defective, remove the battery pack
from the machine.
Only screwdriving bits suitable for the impact drivers
must be used.
Take care when driving in long screws - risk of slipping.
Mount the machine on the screw only when it is
switched off.
Wear ear protectors when working for long
periods of time. High noise levels over a prolonged
period of time may affect your hearing.
LED light (7): do not observe the LED radiation
directly with optical instruments.
Transport of Li-Ion battery packs:
The shipping of Li-Ion battery packs is subject to laws
related to the carriage of hazardous goods (UN 3480
and UN 3481). Inform yourself of the currently valid
specifications when shipping Li-Ion battery packs. If
necessary, consult your freight forwarder. Certified
packaging is available from Metabo.
Only send the battery pack if the housing is intact and
no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from
short-circuiting (e.g. by protecting them with adhesive
tape).
Reducing dust exposure:
WARNING – Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- crystalline silica from bricks and cement and other
masonry products, and