Metabo HPT NV 83A5, Инструкция и руководство по безопасности

Страница: 10 / 80

10
English
ACCESSORIES
WARNING
●
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
Eye protection ..................................................................................................................................................1
Hook ................................................................................................................................................................1
Trigger (A) (Contact Actuation Trigger/Color: Silver) .......................................................................................1
Shaft Ring ........................................................................................................................................................1
OPTIONAL ACCESSORIES ... sold separately
○
Pneumatic Tool Lubricant
1.0 oz. (30 cc) oil feeder (Code No. 877153)
4 oz. (120 cc) oil feeder (Code No. 874042)
1 quart (1 ltr) can (Code No. 876212)
NOTE: Accessories are subject to change without any obligation on the part of metabo HPT.
APPLICATIONS
○
Construction wooden work such as fl oor and wall
framing, roof decking, sub fl ooring.
○
Mobile and modular home construction.
○
Making wooden boxes, palettes, and drums.
○
Packing operations in manufacturing plants, and
other types of packing and crating work in general.
BEFORE OPERATION
Read section titled “SAFETY” (pages 3–7).
Make sure of the followings before operation.
WORKING ENVIRONMENT
WARNING
● No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
● NEVER use reactive gases or
other bottled gases.
Explosion may occur.
WARNING
● Never connect Nailer to pressure
which potentially exceeds 200 psi
(13.7 bar 14 kgf/cm
2
) if a regulator fails.
● Never use non relieving coupler on Nailer.
1. Power source
○
Use only clean, dry, regulated compressed air as a
power source for this Nailer.
○
Air compressors used to supply compressed air to
this Nailer must comply with the requirements of
the latest version of ANSI Standard B 19.3 “Safety
Standard For Compressors For Process Industries.”
○
Moisture or oil in the air compressor may accelerate
wear and corrosion in the Nailer.
Drain daily.
000Book̲NV83A5̲US̲metabo.indb 10 000Book̲NV83A5̲US̲metabo.indb 10 2022/05/19 11:02:36 2022/05/19 11:02:36