12
English
SPECIFICATIONS
1. Cordless die grinder
Model
GP18DA
GP18DB
Motor
DC brushless motor
Rated speed
7,000–29,000 /min
Max. Wheel Diam.
2" (50 mm)
Collet Chuck Capacity
1/4" (6.35 mm)
Battery
Type
Li-ion battery Model BSL1830C
Voltage
DC 18 V
Weight
4.8 lbs (2.2 kg) (BSL1830C attached)
2. Battery
Charger
Model
UC18YFSL
Input power source
Single phase: AC 120 V 60 Hz
Charging time
(At a temperature of 68°F (20°C))
BSL1830C: Approx. 45 min
Charging voltage
DC 14.4–18 V
Charging current
DC 3.5 A
Weight
1.1 lbs. (0.5 kg)
NOTE:
The charging time may vary according to temperature and power source voltage.
WARNING
NEVER use an abrasive wheel, cutting wheel, or any wheel greater than 2” in diameter. Using such wheels
can result in wheel breakage, and will otherwise increase the risk of bodily injury from contact with the
wheel or wheel fragments.
Electric control
○
Soft-start
○
Overload
protection
This protection feature cuts o
ff
the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
○
Overheat
protection
This protection feature cuts o
ff
the power to the motor
and stops the power tool in the event of overheating
of motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down
in a few minutes.
After that you can use it again.
○
Restart prevention function
When the power is still switched on, the tool will not
restart when a battery is installed. This function can
be canceled once the tool is switched o
ff
.
○
Braking Function
Brake is activated when the switch is turned off,
stopping the motor’s rotation.
○
Kickback Protection
The kickback protection feature cuts o
ff
the power
to the motor and stops the power tool in the event of
a sudden drop in the rotational speed of the wheel
during operation (for example, if the wheel locks during
cutting operation, etc.).
00Book̲GP18DA̲NA.indb 12
00Book̲GP18DA̲NA.indb 12
2021/03/04 16:27:54
2021/03/04 16:27:54
