Page 6
BX-807-9800 REV C
2 INSTALLATION
Use the following information to properly deploy the BX-807. Installation of the SCC should ideally
be performed by personnel familiar with environmental monitoring equipment. There are no special
precautions or handling concerns except for the normal level of care required for handling scientific
equipment. Refer to the instructions and diagrams on the following pages.
2.1 Unpacking
Unpack the cyclonic separator and inspect it carefully. Any damage incurred to the equipment
during shipping is the responsibility of the carrier. If any damage to the shipment is noticed before
unpacking,
a claim must be filed with the commercial carrier immediately
. Follow any special
unpacking instructions provided by the carrier as all items are carefully removed from the containers
and each component inspected. It is recommended to document and photograph all damaged
packages and items before, during, and after unpacking them. Contact Met One Instruments, Inc.
(see section 1.2 of this manual) to arrange for any replacement items needed.
Please keep all of the special shipping items (box, foam packing material, etc.) used to ship the
SCC. They should be re-used if the BX-807 is to be transported or shipped (changing site locations,
returning to the factory, etc.). Contact Met One Instruments, Inc. (see section 1.2 of this manual) for
replacement packing materials if necessary.
2.2 Instrument Assembly and Deployment
The BX-807 is designed for easy deployment. It is installed on top of the sample inlet tube as a
second stage after the BX-802 PM
10
inlet. Follow the installation instructions of the instrument with
which the SCC is being used. For example, if deploying as part of a BAM 1020 installation, the
setup instructions in the BAM 1020 operation manual should be followed.
Figure 2-1 Typical BX-807 Installation
Once the BX-807 is installed, verify all O-rings are functional and a proper seal has been achieved
by performing a leak check on the system. The instructions for performing a leak check will also be
found in the operation manual of the instrument with which the SCC has been deployed.
Содержание BX-807
Страница 2: ...Page 2 BX 807 9800 REV C...
