AEROCET 532 Manual Rev B
Page 26
7.
Serial Communications
The AEROCET 532 provides serial communications via the USB connector located on
the right hand side of the unit. RS-485, WiFi, and Ethernet communications are also
available with the optional 83529 Docking Station. Refer to the 83529 Docking Station
Quick Setup Guide to configure the optional communications. The following sections
discuss the various serial communications available with AEROCET 532.
ATTENTION:
A Silicon Labs CP210x Driver for the USB connection must be installed before
connecting to the USB Type C port.
Driver download weblink:
https://metone.com/usb-drivers/
7.1.
Commands
The AEROCET 532 provides serial commands for accessing stored data and settings.
All commands are terminated by a carriage return. These commands are not case
sensitive. The following table lists the available commands. These commands are
available via USB, WiFi, ethernet, and RS-485 hardware interfaces. The settings (baud
rate, parity and stop bits) must match the computer setting for proper communication
regardless of the hardware interface type.
Settings (must match computer settings):
•
Baud Rate = 115200 (USB Default); 9600 (RS-485 Default); 38400 (Dock
Default
•
Parity = None
•
Stop Bits = 1
•
Flow Control = None (XON/XOFF available for Ethernet)
