AEROCET 532 Manual Rev B
Page 13
5.
Menu Selections
The Main Menu is accessible by pressing the
MENU
key on the Operate screen. The
table below and Figure 10 show the Main Menu items. Use the rotary dial to highlight
the desired menu item and then press it to enter that menu screen.
Menu Item
Description
Sample Setup
View / change location ID, Mass / count mode, single or
continuous mode, cumulative or differential count mode,
sample time and hold time.
Toolbox
View / change units, memory, K-factors, flow, and display.
Initial Setup
View / change serial settings, clock, and locations.
About
Display firmware version, serial number, service contact,
calibration date, and run time.
Figure 10
– Main Menu Screen
5.1.
Edit Menu Items
To change settings, press
MENU
to display the Main Menu, rotate the dial to navigate to
the desired item and press the dial
to display the item view/edit screen.
To edit pick list items (e.g.
Sample Setup: Single
or
Continuous
), rotate the dial
to navigate to the item. Press
the dial
to select the item. Rotate the dial to change the
setting. Press the dial
to save the setting or
ESC
APE
to cancel and return to the
previous screen.
