Met One Instruments AEROCET-380, Руководство по эксплуатации

Страница: 31 / 33

Page 30
AEROCET-380 Operation Manual Rev A
10.4 Factory Service
The AEROCET-380 needs to be periodically returned to the factory for service and
recalibration. The recommended period is typically two years during continuous use.
However, some users establish their own interval depending on the harshness of the
sampling conditions, particulate levels, and data scrutiny. High concentration operation will
often require more frequent factory service.
Factory service primarily consists of optical system cleaning, laser/detector checks, and
recalibration. As-found calibration checks can also be requested. Contact the Met One
technical service department to schedule AEROCET-380 service. A Return Authorization
(RA) number must be obtained before the unit is returned.
Refer to section 1.2 to contact Met One for technical assistance and/or factory services.
10.5 Flash Upgrade
AEROCET-380 is firmware upgradeable via the USB C serial connection using a Met One
Instruments flash burn program. The flash program must be provided by Met One
Instruments, Inc. Refer to section 1.2 to contact Met One for more information about flash
upgrades.