Page 52 of 57
SK2016 HW-V-AECM-001
4) Upon completion of changing timer settings for the selected day, press
TIMER
button again to exit timer
programming mode. The settings will then upload to the selected slave unit. The next day of the week’s
settings can be done only upon completion of sending data to the slave units. (Repeat steps 1~4 if
setting is required for the next day of the week).
In Global control mode:
Pressing the master unit’s
CANCEL
button for 3 seconds will cancel all timer settings in all slave
units.
Timer settings will be broadcast to all slave units.
e) Clock synchronization by master unit is as follows:
Press
TIME
and
TIME
buttons for 3 seconds to activate clock synchronization in all slave units. Master wall pad will
respond with a beeping sound.
f)
Key lock
In order to prevent unauthorized access to the system setting, a key lock function is provided. Hold down
and
for 3 seconds to activate key lock.
symbol will light up. Repeat the same to exit key lock. Only
button is applicable in key lock mode.
g)
Swing
Press
SWING
button to activate or deactivate swing function.
h) Sleep
Press
SLEEP
button to activate or deactivate sleep setting. The sleep function is valid in cool or heat modes only.
i)
Temperature setting
Press
or
to enter into temperature setting mode. The temperature
display area blinks indicating the
current set temperature. Press the above buttons to adjust the set temperature.
j)
Mode setting
Press
button to change the operation mode.
k)
Fan speed setting
Press
FAN
button to change the fan speed. Only low speed is available for dehumidification mode.
l)
On/Off control
Press
to start or stop the air conditioner.
MODE
