Date
20.02.19
opto
USB-3.0
Page: 8
Manual
5 Characteristics and field of application
The digital optical system
opto
USB-3.0
can be used to optically transmit USB signals with a data rate of up to
5 Gbit/s correlating to USB3.0 standard. Because of the optical transmission, the system is very robust against EMS
(electromagnetic susceptibility). It can withstand high electric and magnetic fields, like they appear in EMC tests.
The system also is optimized for low noise emission.
Please note that the USB-3.0 is NOT downwards compatible. I.e. there is no transmission with USB2.0 devices.
For the
HUB side transceiver
, power is supplied by internal NiMH batteries which make the system easy to use.
The
opto
USB-3.0
is prepared for the use of external batteries (with the optional battery pack BP84).
For the
PC side transceiver
, power is supplied via the USB cable connected to a PC.
6 Box contents
Quantity
Description
2
Transceivers
opto
USB-3.0 (PC side and HUB side)
1
Duplex multimode optical fiber 62.5 / 125µm
1
Charger (standard)
1
USB 3.0 cable
1
Manual (English)
External battery packs BP84 (optional)
Shielded supply cable for battery packs (optional)
The shipment includes charged batteries. However, due to the self-discharging of NiMH-batteries, they should be
recharged again before use.
Read chapter 9(Maintenance) before charging the devices!
i
Read chapter 9 before charging!
The battery lasts 2-10h. Main factor is the power consumption of the connected
load.
The operating time can be extended by external, shielded battery packs.
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
