opto
LIN
Date:
06/27/12
Datasheet
Field of applica on and characteris cs
The
opto
USB-3.0
system can be used for the op cal
transmission of USB-signals up to a data rate of 5Gbit/s
according to USB3.0 standard. It can be used to transmit USB-
signals over long distances (up to 50m) or to handle ground
poten al problems. With the op cal transmission and the
shielded case, the system is well equipped for EMI and EME
tests.
Technical data
Connectors:
2x USB-3.0 port (hub); 1x USB-3.0 (PC-connec on)
Data rate:
up to approx. 5Gbit/s (USB3.0, not backward compa ble to USB2.0/1.1)
Power supply:
Hub side: 7 NiMH cells with 4 Ah; 2-10h depending on power
consump on of devices at USB ports; five-poled charge plug
PC side: powered by PC; ba<ery or power supply available on request
Case dimensions:
150mm x 100mm x 65mm
aluminum case with rubber feet
Weight:
approx. 1000g
Misc.:
op onal shielded external ba<ery pack (BP84 – 8.4V) to enhance test
me
Applica on
Op cal fiber
Connector / Type:
FSMA / duplex-mul mode fiber 62.5/125µm
opto
USB-3.0
Date
06/02/16
Datasheet
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
