Messtechnik optoUSB-3.0 Скачать руководство пользователя страница 5

opto

USB-3.0

Date

20.02.19

Manual

Page 5

discharge is avoided.

 3.2  Regulations and References

Protect the batteries from heat (e.g. long times of exposure to  direct sunlight) and fire. Do not immerse the
batteries into fluids. Otherwise there is a risk of explosions.

§

Risk of Damage and Explosion Because of Incorrect Treatment

Unintentional or incorrect treatment can damage the batteries, which can even lead to 
explosions of the batteries!

Batteries  that are integrated  into  the devices of    or are  delivered  with  them,  may  only  be charged  with  the
intended chargers from .

These components are compatible to  each other, other chargers may damage the system or may reduce the
capacity or life span of the batteries significantly.

Respect the following references when operating the chargers:

Use chargers only for charging devices and batteries.

Switch devices off before connecting the charger.

Do NOT switch on the device during the charging process.

Maximum charging current 1 A.

Disconnect charger before turning on the device on.

Prior to the first use, charge the batteries completely.

Charge the batteries before use if you have not used them for a longer period (self discharge of the  NiMH

batteries) and after use.

To avoid capacity loss due to the memory effect, discharge the batteries completely every 5 charging cycles. To

do this, leave the device on, until it turns off by itself. Then start the charging process as described above.

§

Risk Through High Voltage at the Charging Device

The charger works with mains voltage.

Security references for work with mains voltage must be followed.

!

Warning of Reduced Capacity and Life Span of the Batteries due to Maloperation

Use only the intended chargers from .

Powered devices must never be used with a connected charger, e.g. for buffering an empty 
battery.

Disregard can lead to a loss of capacity and a shortened life span of the battery in a short time.

 3.3  Charging the Batteries (Battery Pack or Integrated into the Device)

Start of the Charging Process

Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 408­916­5750, www.reliantemc.com

 

Содержание optoUSB-3.0

















Отзывы: