Software
Operating
the Software
8LE-D23_BA_E
20.03.2015
35
/
58
Adjusting the Pulse Period
[µs]
Highlight the M=Light LED for which the settings are to be made.
Read the required period duration from the camera manufacturer's manual.
Set the value by the
Pulse Period
[µs]
slide control so that the slide control does NOT become red.
As an alternative, set the frame rate value for the camera by means of the
Pulse Period
[fps ]
slide
control so that the control does NOT become red.
The slide control that is currently NOT actuated, follows automatically.
Press
Send
.
The required period duration has been set for the highlighted M=Light LED.
You can change the operating mode using the
Pulse Period [µs]
slide control.
At the
Pulse Period [µs]
slide control set the value 0.
The highlighted LED changes to
Auto-Follow
operating mode (section
5.3.5.2, page 31).
Figure 22: Example,
Pulse period
500µs
Figure 23: Example,
Pulse period
1000µs