Operating
the Software
Software
32
/
58
20.03.2015
8LE-D23_BA_E
5.3.5.3.
Trigger-Follow
Operating Mode
The
Trigger-Follow
operating mode only serves for applying the switch-on pulse of the control signal
from the camera system.
Switching on the
Trigger-Follow
operating mode:
Highlight the required M=Light LED.
Select
Trigger Input
.
Slide the
Pulse period
slide control to > 0.
Adjust the required number of pulses per trigger process.
Select the required period duration (
Pulse period
[µs]
) or the required frame rate (
Pulse period
[fps]
).
Adjust the required pulse duration (
Pulse width
[µs]
).
Adjust the required pulse delay (
Pulse delay
[µs]
).
Adjust the required intensity for the switch-on duration between 1 and 255% (
Power)
.
Press Send.
You have switched on the
Trigger-Follow
operating mode. The highlighted M=Light LEDs are
now controlled in accordance with the selected parameters, depending on the corresponding
trigger signal pending at the input of the M=Light LED.