Connect M=LIGHT LED
Handling
82
/
88
05.02.2019
8LE-D23_BA_E.docm
8.1.2 Connect M=LIGHT LED via system control PLC
Pos.: Description
1
M=LIGHT LED
2
Ethernet cable,
3
Ethernet cable,
4
PC with M=LIGHT Control
5
CAN@net II-Adapter
6
M=LIGHT LED BUS splitter
stationary
7
RJ45 Ethernet Connection
8
BNC connection
9
Power supply unit, power
supply
10
TTL-sync line from the camera
11
High-speed camera
12
Patch cable for additional
M=LIGHT LEDs
Figure 64: Connection M=LIGHT LED, (schematic diagram)
Pos.: Description
1
CAN@net II-Adapter
2
RJ45 Ethernet connection
for PC connection
3
DB9 connection
4
BUS terminator /
CAN Bus terminating
resistor
5
M=LIGHT LED BUS splitter
stationary
6
DB9 connection
7
Switch for inversion of Sync
signal
8
RJ45 Ethernet connection
for M=LIGHT LED
9
BNC connection
10
Voltage supply
Figure 65: M=LIGHT LED BUS splitter stationary