
3. Remote Control
15
3. Remote Control
1.
The CD comes with a utility to remotely configure the illuminators. The utility
required no installation. Simply copy the executable file to your computer and
double-click the file to launch the utility.
2. From the menu bar, click
COM PORT
and select a com port number according to
your connection.
3. Check the
Enable Remote Control
check box and select the ID of the illuminator
you want to set up. Then make the configurations as required. In addition to the
settings correspond to the hardware controls of the illuminators, you can also set
these:
Sync Delay:
Adjust the delay for a best illumination condition when video sync is
connected. Usually the default settings 0ms is recommended. However, you can
try to select the parameter that gives optimal lighting so that a best image is
Enforce LED ON/OFF Externally:
Check this box to activate the telemetry LED
ON/OFF function.
Содержание SLI080
Страница 1: ...User Manual High Power Intelligent IR Illuminator ZEIM 4000643G 080 A 4...
Страница 19: ...4 Specification 19...
Страница 20: ......