
10
2. Installation
2. Installation
2.1 Making the Connection
It’s suggested to set up the illuminator at night for optimized illumination results.
1. Attach the illuminator to desired location. Use appropriate mounting bracket as
required.
2. Using a wrench, loosen the side bolts and then tilt the illuminator to desired angle.
Carefully tilt the illuminator until the satisfied angle is achieved. When it’s done,
make sure to fasten the bolts .
3. Connect the illuminator to power supply. Ensure that the polarity is correct when
using DC power.
4. To sync the D/N status, use the
video sync cable
(optional) to make the connec-
tion:
Video Sync Connector Pin Assignment
TELE/VIDEO
Pin
Name
Color
Remark
1
VIDEO
Brown
2
GND
Blue
3
TELE A
White
SHORT: IR OFF (SW2 PIN 8 ON)
OPEN: IR ON
4
TELE B
Green
5
NO
Yellow
6
COM
Grey
•
Connect the gland side to the
TELE/VIDEO
port on the illuminator.
•
If using illuminator as the master:
Terminate the other end of the video sync cable (
Pin #5&6
) to the camera’s
connectors as shown below. Make sure to set the camera’s related action to
D/N
.
Содержание SLI080
Страница 1: ...User Manual High Power Intelligent IR Illuminator ZEIM 4000643G 080 A 4...
Страница 19: ...4 Specification 19...
Страница 20: ......