12. ID. :
16 characters Max. (alpha-numeric).
Using to name each camera.
Press and hold the
↑
button on the side of the camera body for about 2
13. ID POS :
seconds until the menu appears on the monitor. The blinking area represents
OFF :
No ID display.
the option to be set.
TOP :
Display the ID in the top left of screen.
BOTTOM : Display the ID in the bottom left of screen.
14. NEXT BACK :
Selection of next page and last page.
15. EXIT :
Save all settings and exit.
16. CANCEL :
Reset back to original settings.
17. DEFAULT :
Recall factory settings.
9.2
SUB MENU
1. ADDRESS :
Setting address from 001 to 199 for communication with remote
controller.
2. PROTOCOL :
Select protocol for communication with remote controller.
PELCO P, PELCO D and ERNITEC are able to select.
3. LANGUAGE :
Select language of OSD. English, Francais, German are able to select.
4. BIT RATE :
Setting bit rate of data transmission. In RS-485 control, it is necessary
to set a unique camera address and bit rate for each camera.
Note : All of functions in SUB MENU are used for connection with remote
1200, 2400, 4800, 9600 are able to select.
control box (Optional) or PC Software.
5. SOFT VER :
Software version display.
Note : All of functions in SUB MENU are used for connection with remote
control box (Optional) or PC Software.
9.1
SETTING MENU
1. D/N MODE :
AUTO : When set to this mode, the camera will change to COLOUR
mode and B/W mode automatically according to a subject's
brightness.
MANUAL When set to this mode, the camera will remain in COLOUR
or B/W mode by MANUAL selection.
B.C.G :
When set to this mode, the camera will change to COLOUR
mode and B/W mode manually according to a RJ-45 B,C,G
commands.
- 10 -
- 7 -
8. SUB MENU
9. OSD FUNCTION DESCRIPTION
SUB
MENU
001
199
Default Setting
ADDRESS
PELCO P
PELCO D
PROTOCOL
1200
BIT RATE
2400
4800
9600
SOFT VER
EXIT
DEFAULT
ERNITEC
LANGUAGE
ENGLISH
FRANCAIS
GERMAN