5
English
Step 1. Mark Mounting Area
Use the mounting template to mark out and prepare a mounting area.
1. Place the supplied mounting template on a mounting surface. Drill 7 mm holes x 3 at the mounting
surface corresponding to the 3 indicated positions for plastic anchors (supplied).
2. Please then insert the 3 plastic anchors (supplied) into the 3 drilled holes on the mounting surface.
3. The
Cable Channel
indicated is an area preserved for cables entry and should be placed at the rear
side of the camera. Also,
Front
indicated clearly shows the forward side of the camera.
The holes (x3) for
plastic anchors
Figure 2 - 1: Mounting Template
