10
English
2.2.
Connecting the Wires
After opening the rear lid of the camera, you will see various connectors for different usages. Please refer to the following
parts for more details.
Power
AC 24V
Connect the power terminal with AC 24V power source.
DC 12V
Connect 12V (-) to terminal =DC 12V-, and connect 12V (+) to terminal =DC 12V+
PoE
Connect the RJ-45 jack to a PoE compatible network device that supplies power and internet
connection capability through the Ethernet cable.
Caution
• Never connect more than one type of power supplies at the same time to avoid
damage to the unit.
• If using DC supply, make sure the polarity is correct. Incorrect connection may
cause malfunction and/or damage to the unit.
Control
Network
Insert audio in/out cables and alarm in/out cables to the corresponding connectors of the unit if required.
Using an Ethernet cable, connect one end to the RJ-45 connector of the unit and the other end to a LAN port of a network device,
such as a hub, a switch, or a router, on your local network to obtain network connectivity.
