8
English
Step 3. Assembling the Camera
Please refer to the following steps with figure for correct assembling order.
1.
After adjustment, fit the inner liner over the camera lens until it clicks into the place.
2.
Gently put the top cover upward to attach with the camera body.
3.
Fasten the 3 torx screws with the camera body clockwise to complete the mounting.
1
2
3
Figure 2 - 6: Assembling and Completing Camera Mounting
2.2.5
Desiccant Placement
For the sake of lessening the moisture effects within the camera, it is strongly recommended to have a desiccant pack
adhered to the internal side of the inner liner as shown below prior to completing the mounting procedure.
Desiccant Pack
Figure 2 - 7: Desiccant Placement