7
English
2.2.4
Mounting the Camera
Step 1. Mounting Preparation
Paste the included guide pattern onto a wall/ceiling where the IP camera is about to be located, and drill 3 hole patterns in
accordance with the indications on the guide pattern (3-Ø4.5 Holes) followed by hammering the 3 plastic anchors into the
drilled holes. Also, drill another hole for button conduit cable entry as the indication of “Cable hole” (Ignore drilling cable hole
if applying side conduit manner).
Cable Entry Hole
Plastic Anchors Holes
Figure 2 - 4: Guide Pattern
Step 2. Mounting the Camera
Place the camera on the predefined surface and fasten the 3 tapping screws clockwise into the plugged plastic anchors
securely to fix the camera onto the location.
Figure 2 - 5: Mounting the Camera