6
English
2.2.2
Disassembling the Camera
Please refer to the steps with figures below for correct disassembling order.
1.
Loosen the 3 torx screws counter-clockwise by the torx wrench.
2.
Gently pull the top cover downward to take it apart from the camera body.
3.
Lift to open the inner liner coating on the lens for adjustment later.
1
2
3
Figure 2 - 1: Disassembling the Camera
2.2.3
Wiring the Camera
After disassembling, the PoE RJ-45 Ethernet port is visible on the camera body for user to connect an Ethernet cable for both
power supply and network connectivity purposes. The Ethernet cable can be arranged by side conduit or bottom conduit
manner. The following figures are for reference on how to arrange 2 methods.
Figure 2 - 2: Bottom Conduit Manner Figure 2 - 3: Side Conduit Manner