3. Web-based Interface
38 User Manual
3.3.4 NTP
If you want the camera to synchronize its time clock with an NTP (Network Time Protocol) sever,
configure the NTP server settings here.
NTP Server:
Enter the IP address or the domain name of the NTP server to synchronize with.
Time Zone:
Select a time zone in which the camera is located.
DST:
Tick the
Automatically Adjust for Daylight Saving Time Changes
check box to apply
the daylight saving time and users are supposed to configure the start/end time period by clicking
the drop-down menus respectively.
3.3.5 RTSP
RTSP is a standard for connecting a client to establish and control streaming data over the web. If
you want to allow third-party devices or software to access video/audio streams from the IP camera
over the network, you must configure the RTSP ports. You can provide up to 6 streams according to
the specific codec mode with different RTSP port.
To use an RTSP player to access the camera’s streams, you have to use correct RTSP URL to request
the streams. Refer to the table below for RTSP URLs:
