22
Network Configuration
The IP Camera acts as one of the network devices. It allows user to configure the
network functionalities based on applications. This section will describe the network
configurations. Fundamentally, for instance, the IP assignment of the device can be
done via
DHCP server
,
static IP option
or
PPPoE
to obtain IP from the service
provider.
There are 5 subd
irectories in “Network”:
Network Type
Network Connectivity
Quality Service
Access Port
Access IP Filter
Network Type
Network Type
There are 3 ways to configure address for the IP camera device, including
DHCP
,
Static IP
and
PPPoE
.
Enable DHCP Service:
The default setting is DHCP, which camera will be automatically given an IP
address (IPv4/IPv6) in a network with DHCP server.
Use Static IP:
Camera may also be manually assigned with a static IP address (IPv4/IPv6). Subnet
mask, Gateway and DNS server(s) will also need to be specified for certain network function properly
executed.
Enable PPPoE Service:
This service is usually provided by an ISP (Internet Service Provider). IP
Camera can establish a dial-up connection to the ISP and then get connected to Internet. (Only IPv4)
Содержание NCB752
Страница 1: ...NCB752 ...
Страница 4: ...3 Package Contents Camera Hardware Pack Camera Stand Quick Start Guide Screws ...
Страница 52: ...51 Figure 1 Figure 2 Figure 3 ...
