EMERGENCY KEY
If the batteries die or you lost your code use the emergency key (2 keys included).
1. Insert the plug located on the external power pack
into the access hole which is located on the bottom
edge of the keypad.
2. Push the plug up to release the emergency key cover.
3. The emergency cover will loosen enough so you can
remove it.
4. Insert the over ride key and turn it counter clockwise
for models MFS-38E & 45E or turn it clockwise for
models MFS-55E, 63E & 80E.
5. Turn the handle or the thumb-turn to open the door.
OPENING THE DOOR
1. Press the “#” button to wake up the lock.
2. Enter a valid code and press # and the lock will display “OPEN”.
3. Turn the handle or operating key within 5 seconds and open the door.
•
Valid code: LCD will display “OPEN”
•
Invalid code: LCD will display “Error”
CLOSING THE DOOR
BACK OF SAFE DOOR
1. Turn the handle or thumb-turn back to the
locked position.
2. Always check to make sure the safe is locked
before walking away.
CHANGING BATTERIES
1. The battery compartment is located on the back
of your safe door.
RESET BUTTON
2. Replace existing batteries with 4 AA batteries.
PROGRAMMING
We highly recommend changing the Factory Set Code to your own code
CHANGING USER CODE # 1 (Factory Set to: #-1-6-8-#)
1. Press the “reset” button located on the back of the safe door. (Red button)
2. Enter your new code (1-8 digits) followed by #.
3. Test your code a couple times before closing the door.
•
Valid code change: LCD will display “In”
CHANGING USER CODE # 2 (Factory Set to: #-8-8-8-8-8-8-8-8-#)
1. Press “#”
2. Press “0” twice (00)
3. Press the “reset” button located on the back of the safe door.
4. Enter your new code (1-8 digits) followed by #.
5. Test your code a couple times before closing the door.
•
Valid code change: LCD will display “In”
External Power
Pack Plug
Access Hole
BATTERY COMPARTMENT
https://www.supplychimp.com
