IMPORTANT: DO NOT RETURN SAFE TO STORE
If your having difficulty programming, opening your safe or your missing
parts, please visit www.mesasafe.com (technical support section) or call
technical support at (800) 490-5624.
EXTERNAL POWER JACK
EMERGENCY KEY
ACCESS HOLE
TO RELEASE THE
EMERGENCY KEY COVER
THUMBTURN
ONLY FOR SAFE MODELS
MFS-38E & MFS-45E
QUICK START
1. Install the 4 AA batteries into the external
power pack (4 AA batteries and 1 power pack
included).
2. Plug the external power pack into the external
power jack.
3. Enter
#88888888-# or #168-#
4.
Turn the handle or thumb-turn clock within 5
EXTERNAL POWER PACK
seconds to open the door.
5.
To lock your safe turn the handle or thumb-turn back to the locked position and
make sure your safe is locked before walking away.
LOCKOUT PENALTY
Entry of 3 consecutive invalid codes will put the safe into lockout mode. An alarm
will sound for 10 seconds and the keypad will not let you enter anything for 3
minutes. The LCD screen will display Error until the lockout period is over.
LOW BATTERY WARNING
After entering your code the LCD screen will display “Lo-batte”.
Important
: If the batteries die or are to low to unlock your safe use your external
power pack or emergency key to open the safe and then change your batteries.
Hiding your code:
Press “*” before you enter your code. This will prevent your
code from being displayed on the LCD screen.
Example: #*88888888# or #*168#
Deleting wrong entry
:
Press “*” to delete 1 entry or press and hold “*” to delete
the entire entry.
https://www.supplychimp.com
