Mesa MAWS Series, Руководство по эксплуатации

Страница: 4 / 12

QUICK START
1
Insert 4AA Batteries
[not included]
into the compartment located
inside the door
4
Enter: & the green light will appear for 5 seconds
3
Pull the handle to open door while the green light is still on
IMPORTANT : If you misplaced your code or if the batteries die while the
safe is in the locked position, use the override key that is included with
your safe.
Do NOT store the override keys inside the safe.
QUICK INSTALL
[Detailed instructions on page 5]
1
Choose a location free of plumbing & electrical wires
2
Adjust & secure the telescoping back
3
Locate studs
Safe is designed to fit between standard 16" center-to-center studs.
4
Cut out a 211⁄8" high x 14" wide section in your wall
5
Remove door [ optional ]
6
Mark & drill 1⁄16" - 1⁄8" pilot holes into studs
7
Anchor your wall safe
8
Install shelf extensions if needed
IMPORTANT : If you misplaced your code or if the batteries die while the
safe is in the locked position, use the override key that is included with
your safe.
Do NOT store the override keys inside the safe.
OVERRIDE KEY SYSTEM
IMPORTANT : Do not store the override keys
inside the safe!
For your convenience, we have engineered a manual
override key system for your safe. If you forgot or
misplaced your code or if the batteries die, use the
override keys to manually open your safe.
1
Remove plastic cap [located below the keypad]
2
Insert the override key & turn counter-clockwise
3
Pull handle to open safe
PG.3
|
MAWS-SERIES ELECTRONIC LOCK INSTRUCTIONS
IMPORTANT :
To ensure safety of your belongings, you
MUST change the factory set Code to your own unique code
immediately.
* * * *