Merloni Elettrodomestici 85510, Информация о сервисе

Страница: 6 / 20

6
INSTALLATION
Before drilling walls to fit the wall brackets, check that there are no cables or pipes buried in the wall.
Wall fixings must be appropriate for the construction of the wall.
The heater should be mounted horizontally and not be mounted directly below an electric outlet.
Position the heater to avoid curtains etc. being within 100 mm (4”) around the top and ends of the
heater. Vinyl floor coverings and varnished floors require a minimum clearance of 120 mm to the
underside of the heater.
Heater types
85820
and
85840
are suitable for use in bathrooms or shower rooms.
For these installations the heater must be positioned so that a person in the bath or shower cannot
touch switches and other controls.
Ensure that all packaging material is removed from the heater.
1. Fix the wall bracket to the wall, allowing for the minimum clearance requirement (listed in the
tables below). The wall bracket may also serve as a template (see drawing). Please ensure the
wall bracket(s) is positioned in accordance with the drawing.
2. Align the bottom of the heater onto the bottom hooks of the wall bracket. Raise the heater
towards an upright position and secure the wall bracket safety strap(s), before finally securing
the heater to the top wall brackets.
Cat. No. Watts L A
85610 800W 1095 820
85620 1000W 1275 1000
85630 1200W 1545 1270
85640 1500W 1725 1450
Cat.No Watts L A
85510 800W 645 370
85520 1000W 735 460
85530 1200W 915 640
85540 1500W 1095 820
85550 2000W 1365 1090
Cat.No Watts L A
85820 600W 555 280
85840 1000W 735 460
Fig. 1
Mounting Positions