Merivaara PRACTICO, Руководство по обслуживанию

Страница: 25 / 32

25
4.6.8 Replacement of leg section gas spring
Remove the leg section from the operating table and
turn upside down.
• Remove screws (1).
• Remove bushings (2).
• Turn the accessory rail (3) to the side.
• Remove locking rings (4)
• Remove pins (5).
• Removal of gas spring from protective tubing
(see section 4.6.6 page 24)
4.7 Replacement of castors
• Raise the table base casing (see section
4.3.2 page 15)
• Put the brake pedal (1) into its free position.
• Loosen screws (3).
• Loosen screws (4).
• Move the brake bar to the side. (2).
• Remove the castor.
• Reinstall castor in reverse order. Ensure that the
brake pedal and cam positions are in alignment
and that the castor is facing in the right direction.
4.7.1 Castor adjustment
•
Engage the brakes.
• Loosen screws (3).
• Move the brake bar to the side (2).
• Braking power is increased by turning the castor axle
counter-clockwise one rotation at a time (as seen from
above). Use a large screwdriver or similar tool.
o1
04
6u
.p
df
5
1
2
6
4
4
5
3
o1
04
6r
.p
df
2 1 3 3 4
4
o1
04
6s
.p
df
2