Merivaara PRACTICO, Руководство по обслуживанию

Страница: 15 / 32

15
4.3 Removal of casings
4.3.1 Table base casing
4.3.2 When table base casing height is sufficient
• Disconnect power supply
• Remove casing screws (3) 2 pcs.
• Raise the casing (2) from its seat and hang from the mattress base or separate from the table base
with suitable spacers.
• Remove cover (4) by lifting it upwards.
4.3.3 When table base casing is to be raised and turned
• Disconnect power supply
• First, remove the four screws (1)
• Raise the telescoping column casings and hang from the mattress base.
• Disconnect the hand control connector from the table base.
• Remove casing screws (3) 2 pcs. Raise the casing from its seat, turn into the desired position and
hang from the mattress base or separate from the table base with suitable spacers. Remove cover (4)
by lifting it upwards.
• Reassemble in reverse order.
4.3.4 Removal of upper bellows end
• Remove the four screws (3), which fasten the
bellows to the seat.
1 2
3
o1046b.pdf
4
3 3
o1
04
6c
.p
df
o1046v.pdf