Merit MEGATOUCH FORCE Series, Инструкция по замене

Страница: 5 / 12

COPYRIGHT © 2008 MERIT ENTERTAINMENT
FIGURE 4 - CLOSEUP OF MOTHERBOARD
FIGURE 5 - POWER SUPPLY
TWIST
CLAMP
STANDOFF
POWER SUPPLY
MOUNTING
SCREWS
(2 PLACES)
I/O BOARD POWER
CONNECTOR
MOTHERBOARD POWER
SUPPLY CONNECTOR
11. Disconnect the 20-pin power supply con-
nector from the motherboard (see Fig-
ure 4).
12. Disconnect the I/O board power connec-
tor from J6 on the I/O board (see Figure
4).
13. Remove the standoff securing the twist
clamp in the upper right corner of the
game, then undo and remove the clamp
(see Figure 5).
14. Remove the 2 screws fastening the power
supply mounting bracket to the game (see
Figure 5) and remove the power supply.
PM0684-02 FORCE POWER SUPPLY REPLACEMENT INSTRUCTIONS 3