background image

Troubleshooting

39

Service and guarantee

Service

The Meridian components have been carefully designed to give

years of untroubled service. There are no user-serviceable parts

inside the case, nor do the units require any form of

maintenance.

In the unlikely event that your DSP33 fails to function correctly,

it should be returned, in its original packaging, to your Meridian

dealer.

In case of difficulty within the UK or USA please contact the

appropriate sales and service address shown on page ii.

In case of difficulty outside the UK or USA, contact the importing

agent for the territory. A list of Meridian agents abroad is

available from Meridian Audio.

No responsibility can be accepted for the DSP33 whilst in transit

to the factory or an agent, and customers are therefore advised

to insure the unit. When seeking service under guarantee, proof

of the date of purchase will be required.

Guarantee

The DSP33 Digital Loudspeaker System is guaranteed against

defects in material and workmanship for two years from the date

of purchase.

The guarantee is void if the DSP33 Digital Loudspeaker System

has been subject to misuse, accident, or negligence, or has

been tampered with or modified in any way without the written

authorisation of Meridian Audio Limited. Note that connecting

anything other than the correct network lead to the COMMS

sockets may cause damage to the DSP33 Digital Loudspeaker

System which will not be covered by this guarantee. Attempted

servicing by unauthorised people may also invalidate this

guarantee. Labour and carriage charges are not covered unless

by local agreement.

Outside the UK, local warranty liability is restricted to equipment

purchased within the territory. Our agents abroad are only under

contractual obligation to service under guarantee equipment

sold through them. They are entitled to make a non-refundable

charge for any service carried out on other equipment.

This guarantee does not limit your statutory rights within the

United Kingdom.

Содержание DSP33
















































Отзывы: