Meridian DSP33, Руководство пользователя

Страница: 34 / 47

Configuring the DSP33 loudspeakers using a computer
29
If you choose Meridian surround controller the Start volume ,
Tilt , and Bass options are controlled by the surround controller,
and will be greyed out in the Meridian Configuration program.
●
Set the Speaker use to Normal for a main or surround
speaker, or Centre for a centre speaker.
If the speaker is close to a wall or corner, you can optionally
apply bass equalisation to adjust the frequency response to
compensate for its position.
●
Use the appropriate Front or Centre speaker boundary
drop-down menu to choose the appropriate option:
Option What it means
Free Flat frequency response.
Boundary Speaker closer than 0.5m (2') to a wall.
Sub 1 or 2 Applies a second-order high-pass filter at
80Hz or 120Hz respectively for use with
an analogue subwoofer.
Corner Speaker closer than 0.5m (2') to a corner.
Changing the setup options
The next stage in editing the settings is to configure the general
Setup options.
To change the setup options
●
Click the Setup icon in the left-hand panel of the Meridian
window.
The Setup options will be displayed:
●
In the Controlled by section choose the appropriate option
for the system you are using.