30
Configuring the DSP33 loudspeakers using a computer
For best results with a Meridian D1500 or D2500 subwoofer
choose
Free
,
Boundary
, or
Corner
as appropriate.
If you have specified the
Speaker Use
as
Centre
you can apply
a
Centre Speaker tilt offset
, which is added to the
Tilt
value for
the selected source.
The recommended setting is -1dB when the speaker is
positioned above a television.
Start volume
The
Start volume
setting determines the volume selected on
coming out of standby.
●
Set the
Start volume
to 65 to leave the volume unchanged
(as on other Meridian products).
●
Set the
Start volume
to a value other than 65 to set the
volume to that value.
Advanced options
The
Advanced
options are described in the following table:
Option
What it means
Volume control
Specifies whether the DSP33
provides volume control for the
system. Choose
Main
if the DSP33 is
in the main room,
Secondary
if the
DSP33 is used in a second room, or
None
if the DSP33 is in the second or
third room of a three-room system.
Comms controller
Specifies whether the DSP33 is
status
controller, not controller, or set
automatically.
System address
For multi-room setups.
Содержание DSP33
Страница 1: ...SP33 Digital Loudspeaker System u s e r g u i d e...
Страница 2: ...i Preface Meridian DSP33 Digital Loudspeaker System User Guide...
Страница 45: ...40 Troubleshooting...
Страница 47: ...Index 42 T Tilt 32 Toolbar buttons 25 Troubleshooting 35 U Unpacking 10 V Volume adjusting 21 muting 21...