Meridian Analogue Controller 502, Руководство пользователя

Страница: 32 / 40

Setting up the analogue controller
28
●
To return to 500 COMMS operation repeat the above
procedure, and select Type 1 or 3. For more information see
Choosing standard settings, page 14.
To connect to Meridian 600 or 200
Series equipment
If your system includes any Meridian 600 or 200 Series units,
with 600 COMMS or 200 COMMS sockets, you should set all
the 500 Series units to 200 COMMS operation using the
following procedure:
●
Switch off the analogue controller, using the power switch on
the back panel.
●
Switch on the power again while holding down the Off key on
the front panel.
The display will show
the current Type setting:
Type 1
●
Press
A
or
V
on the front panel to change the Type setting to
Type 2.
The display will show:
Type 2
●
Switch the power off and on again to restore the analogue
controller to normal operation.